The method of material properties of the band of military hats must be polyethylene. The weight of a military hat must not exceed 50 g. The hardness must be 52 + 3 Shore-D. The functional test carried out on the hats must ensure that they must not break, crack, or twist. According to the first aspect, this thermal resistance test applied to hats must not be softened and weakened. Moreover, the caps, according to the first aspect, must not be broken and hardened, when applied to the cold resistance test. There must be no color identification and fuzzy color on the military hat dye stability test.
MILITARY HATS HOOP FEATURES
The color of the pulley, on military hats, must be at least, three colors different from those of the hat. The bonnet pulley used in SAE 1070 requires the use of quality steel metal bands. Most should be 2.2 + 0.2mm. The thickness should be 0.7 + 0.1 mm. It must be covered. The type of coating material should be polyethylene. The thickness of the coated material must be between 0.5 and 0.7 mm. The material type of the clips should be polyethylene or polyamide. The ends of the body of the hoop to the hat should be to fit into the clip. The painted thickness should be at least 0.5 mm. When manually folded, and opened ten times, there should be no peeling paint. The material type of the clips must be AISI 304 stainless steel.
MILITARY HAT BALL FEATURES
The level of the color difference of the ball must be at least three tones. When hot test resistance is applied, one should not compare softening and sagging in the former. When the cold endurance test is applied, the ball should not harden and break. The width of the military hat used should be 16 to 18 mm. Bia materials must be polyethylene or cotton type. When the military hat passes through the trims of the ribbon, the bias should not be pinched and inserted into the bands.
CHARACTERISTICS OF MILITARY HATS
The color differences of military hats should be 4 to 5 tons from the color of the hat fabric. The front of the hat should be shiny. The material type can be changed according to the customer’s request.
VISOR FEATURES OF MILITARY HATS
The color shade of the military hat, between the color difference of the shield material, must be at least 4-5. After applying the cold test against the visor, there should be no hardening or breaking. The top layer should be made of shiny artificial leather. The surface of the fabric should be coated with polyvinyl chloride PVC. The thickness of the top layer should be between 0.6 and 0.8 mm. The middle layer should be plastic.
The thickness of the intermediate layer should be between 1.5 and 2 mm. The lower layer must be made of mat faux leather, and the surface of the fabric must be coated with polyvinyl chloride PVC. The thickness of the substrate should be 2 + 0.1 mm, and the layers are glued together. The top and bottom layers are sewn together with the shiny artificial leather band on the convex side. The number of stitches in the seam is 10 cm. The fusion must be 30 + 5 pieces.
